POLYUS R&DI
Products About News Form

LASER
LEVELERS &
POINTERS
 POLYUS Research & Development Institute offers a new laser products for building works and area planning: UL-type laser levelers, ZNL-02 Direction Pointer, LPP-02 Pointer for Vertical and Horizontal Planes and OPP-01 Prism Reflector.



UL-01 Laser Leveler

UL-01 Laser Leveler consists of semiconductor laser module emitting in red region of spectrum. The leveler is hard connected with two bubble-levelers, which connected with mounting surface of the device. The scale lighting is used for work at lower light conditions.
UL-01 Laser Leveler is used for:
  • Pointing of horizontal level and horizontal planes
  • Pointing of vertical level and vertical planes
  • Marking of horizontal plane
  • Marking of vertical line for setting of supports
Specifications
Output wavelength 635 - 670 nm
Output power1 - 1.5 mW
Output spotnot more 6 mm
Output spot at distance of 20 m not more 8 mm
Scale division of cylindrical ampoule of the leveler0.28 mm/m (1 ')
Power supply3 AA batteries
Continuous operationnot less 30 h
Sizes200x25x40 mm
Weight with batteriesnot more 290 g

Delivery set includes:
  • UL-01 Laser Leveler
  • Prism
  • Table
  • Adapter
  • Charger
  • Technical manual

    • UL-02 Laser Leveler

    Features
    • Mutual adjusting of laser beam with cylindrical ampoule relatively to mounting surface of the device with accuracy of ± 3 °
    • Reliable water-resistant metal package
    		  UL-02 Laser Leveler consists of semiconductor laser module emitting in red region of spectrum. The leveler is hard connected with cylindrical ampoule leveler. The scale lighting is used for work at lower light conditions.
    UL-02 Laser Leveler is used for:
    • Pointing of horizontal level and horizontal planes
    • Marking of horizontal plane
    • Marking of vertical line for setting of supports
    Specifications
    Output wavelength 635 - 670 nm
    Output power1 - 1.5 mW
    Output spotnot more 6 mm
    Output spot at distance of 20 m not more 8 mm
    Scale division of cylindrical ampoule of the leveler 0.28 mm/m (1 ')
    Adjustment of laser axis not less 50 mm
    Power supply3 AA batteries
    Continuous operationnot less 30 h
    Sizes240x20x50 mm
    Weight with batteriesnot less 580 g

    Delivery set includes:
  • UL-02 Laser Leveler
  • Prism
  • Table
  • Adapter
  • Charger
  • Technical manual

    • ZNL-01 Direction Laser Pointer

    ZNL-01 Direction Laser Pointer is used for:
    • Pointing of horizontal and vertical planes
    • Geometric area alignment
    • Pointing of declined planes
    • Plumb-line
    • Marking of horizontal rings and arcs
    • Marking of axis lines
    		 ZNL-01 Direction Laser Pointer consists of laser pointer rotated in two orthogonal axis, which hard connected with ampoule of bubble-leveler. The pointer can be used as leveler, plumb-line or set square with side size of 20 m. Axis of direction laser pointer is adjusted to horizon by three screws of bubble-leveler.
    Specifications
    Output wavelength 635 - 670 nm
    Output power1 - 1.5 mW
    Output spotnot more 6 mm
    Output spot at distance of 20 m not more 8 mm
    Accuracy of laser beam alignment to bubble-leveler 0.6 mm/m (2 ')
    Accuracy laser beam fixation in 90 ° 0,6 mm/m (2 ')
    Accuracy of decline of laser beam turning in horizontal plane respectively horizon ±5 °
    Power supply3 AA batteries
    Continuous operationnot less 30 h
    Sizes150x130x210 mm
    Weight with batteriesnot more 1 kg

    LPP-02 Laser Pointer of Vertical and Horizontal Planes

    LPP-02 Laser Pointer of Vertical and Horizontal Planes is used for:
    • Pointing of horizontal and vertical lines
    • Pointing of horizontal and vertical planes
    • Geometric area alignment
    • Marking of horizontal rings and arcs
    • As well as floor, setting of vertical supports, marking of foundation, drain and road works etc.
    		 LPP-02 Laser Pointer of Vertical and Horizontal Planes consists of laser pointer hard connected with pendulum plumb-line which is self adjusted in angle of ± 5 °. The device projects a visible vertical line. The second rotated beam forms a visible plane. The plane is formed by rotated prism manually or by electric motor with regulated turns.
    Specifications
    Operating temperature- 10 ... + 40 °C
    Output wavelength635 - 670 nm
    Output power1 - 1.5 mW
    Output spotnot more 6 mm
    Output spot at distance of 20 m not more 8 mm
    Discrepancy of laser axis and vertical line0,6 mm/m (2 ')
    Laser pointer accuracy respectively vertical line ±5 °
    Power supply3 AA batteries
    Continuous operationnot less 30 h
    Sizes134x60x50 mm
    Weight with batteriesnot more than 0.4 kg
    By agreement with the customer delivery set can also include receiver defining plane position and special leveling staff.

    OPP-01 Single-Prism Reflector

    OPP-01 Single-Prism Reflector is used for work with electronic tacheometers and laser rangefinders. It is possible to use as wood as metal mounting surface with the reflector.

    Delivery set includes:
    • Single-Prism Reflector ± 6 ''
    • Magnetic bush


    3 Vvedensky St., Moscow, 117342, Russia
    tel:+7 095 3330389 fax:+7 095 3330256
    e-mail: mail@polyus.msk.ru

    http://www.polyus.msk.ru